• BUKU 2000ABK-34 1/8th Scale Clutch Kit with 34MM Flywheel and ABK Shoes


  • £66.50

  • Click here to be notified by email when BUKU 2000ABK-34 1/8th Scale Clutch Kit with 34MM Flywheel and ABK Shoes becomes available.

  • Description

    1/8th Scale Clutch Kit with 34MM Flywheel and ABK Shoes. Complete kit with pre-assembled clutch, collet, SG style nut, hex wrench, shims and special Buku threadlocker.

    The 34MM flywheel is the most common size for off-road vehicles. If you do not see your car listed specifically on this page the chances are you will need a 34mm flywheel.

    Fits Losi, X-Ray, Mugen, (Associated), and most other 1/8th Scale Buggies and Truggies and monster trucks unless specifically listed elsewhere on this page.

    Komposite shoes require use of a NEW clutch bell.

    We are now shipping Buku Bonded Komposite clutch shoes. Our exclusive and patent pending use of the worlds most advanced friction material bonded to a precisely engineered shoe base gives these revolutionary clutch shoes truly amazing characteristics.

    The Buku Komposite material is almost pure Aramid (Kevlar) fiber and is extremely wear resistant outlasting even the hardest aluminum shoes by 300% OR MORE! In addition the Komposite causes virtually NO WEAR to the clutch bell!

    The Komposite material does not burr or deform in any way preventing virtually all clutch failures related to these causes.

    The extremely low wear rate and uniform friction characteristics of the Komposite coupled with no wear to the clutch bell create the most consistent and reliably performing R/C clutch in the world!

    Add this to the 10 second adjustability of the Buku Speed Tune Clutch and it's clear...

    Nothing else even comes close!

    Buku Komposite shoes will outlast traditional clutch shoes by so much that they will not only pay for themselves but, add up the the savings in replacement shoes and clutch bells for traditional aluminum clutches and the Buku Komposite Clutch Kit pays for itself!

    The Buku Bonded Komposite Clutch...

    Unequaled Adjustability and Performance

    Literally Pays for Itself!

    Any Questions?

    1/10 Scale Bonded Komposite Shoes fit all Buku 1/10 Scale Clutches

    1/8 Scale Bonded Komposite Shoes fit all Buku 1/8 Scale Clutches


    It is highly recommended that a NEW and VENTED clutch bell be used with Buku Komposite shoes. Any aluminum residue remaining in an old clutch bell will foul the Komposite shoe surface.

    Buku Komposite clutch shoes should NEVER be mixed with aluminum shoes!

Share this product